RB iconIP iconMPE iconRBAS iconRouse icon

斯堪尼亚 R480 8x2 Crane Truck with 66 tm Fassi Crane – Jib

Favorite收藏
share分享
Save search保存搜索
打印

信息

类别
起重车
品牌/型号
斯堪尼亚 R480 8x2 Crane Truck with 66 tm Fassi Crane – Jib
生产年份
2011
里程数
186000 千米
设备所在位置
Rogaland
国家
挪威
马斯客 ID
EB83F65A

定价

选择币种
价格

不含增值税

详细信息

内部库存编号
25129
生产号/编号
YS2R8X2000206xxxx
其他信息
Please provide reference number upon request: 25129 General Information Model year: 2012 Make/Model: Scania R480 Roadworthiness inspection valid until: 2 March 2027 Engine: Euro 5, 480 hp Drivetrain: 8x2 First registered: 27 March 2012 Technical Information and Equipment Mileage: 186,000 km Transmission: Manual Suspension: Parabolic suspension at the front and air suspension at the rear Retarder Flatbed length: Approx. 650 cm + 135 cm extension Tyres: Good condition, see photos 6 boat supports Heating in the storage compartment and on the flatbed Mechanical side underrun protection New hydraulic pump Crane Make/Model: Fassi F660XP, 2011 Lifting capacity: 66 tonne-metres Crane inspection valid until: March 2027 Crane operating hours: Approx. 5,450 hours Reach: Approx. 28 metres Jib Load chart Remote control Dimensions and Weight Length: 1,075 cm Wheelbase to 2nd axle: 194 cm Wheelbase to 3rd axle: 335 cm Unladen weight: 23,280 kg Maximum payload: 8,645 kg Remarks The clutch should be inspected. It engages slightly when cold but works well once warmed up. Description Scania R480 crane truck with Fassi F660XP crane, 2012 model, with only 186,000 km. Both the truck and the crane are approved until March 2027. The truck features an approximately 650 cm flatbed with a 135 cm extension. Available for delivery at short notice. Km: 186000 HK: 480 Technical approved: Yes EU-approved until: 02.03.2027 Own weight: 23280 Year controlled until: 03.2027 Payload: 8645 Euro: 5 Model: R480 8x2 Kranbil m/ 66 t/m Fassi kran - Jibb - Båtstøtter - Lav km! Gearbox: Manual

ATS Norway AS

Industriveien 43B 7080 Heimdal Trøndelag 挪威
9
加入马斯客的年限
获取电子邮箱通知
report ad举报可疑广告