斯堪尼亚 P320 EKOCEL
向卖家询价

24
























1 / 24
打印
信息
类别
平板车
品牌/型号
斯堪尼亚 P320 EKOCEL
生产年份
2017
里程数
173686 千米
设备所在位置
Bielany Wrocławskie
国家
波兰
马斯客 ID
AC67F51A
详细信息
轮轴配置
6x2
生产号/编号
YS2P6X20005488860
注册编号
WGM29930
排放标准
欧6
发动机输出功率
235 kW (320 马力)
发动机排量
9291 cm3
变速器
Automatic
其他信息
VEHICLE/EQUIPMENT DESCRIPTION AND TECHNICAL CONDITION:
SCANIA P320 6×2 – EKOCEL MEDIUM XLS refuse collection truck
Moderate mileage.
Electronic body control.
Three-axle chassis.
Approximate start time.
Estimated service cost is approximately 40,000-50,000 PLN.
VEACOM VERIFICATION STANDARD:
Equipment verified according to the VEACOM CZ standard.
The offered equipment comes exclusively from trusted sources – directly from end users. Before being listed for auction, it was verified on-site by a VEACOM technician who physically inspected its technical and visual condition, documentation, VIN/serial number, and visible defects.
The description and photographic documentation fully reflect the actual condition of the offered equipment. A transparent verification process increases buyer safety, reduces the risk of discrepancies with the description, and allows for informed purchasing decisions.
GENERAL CONDITION: The description is general and does not constitute a guarantee of the full technical functionality of individual components. The Buyer should take into account the described condition of the Vehicle and the possibility of additional signs of wear resulting from previous use. KNOWN DEFECTS AND FAULTS: Dead battery. Poor body speed - slow operation. Signs of corrosion. Errors on the screen. Damaged steering knuckles on axle 1 and axle 3. Oil leaks on the gearbox. Bushings need to be replaced - all on the front axle springs and hangers. Damaged fuel tank. Longitudinal and transverse link ends need to be replaced. Shock absorbers on axle 3 need to be replaced. All bushings on the half-springs need to be replaced. DPF needs to be burned out., Frame corrosion, Due to long-term shutdown, service is required before putting into operation, Reduced engine power, Increased oil consumption, Poor engine starts