所有类别

发布！

Teknamotor Skorpion 250R/90

Name: Teknamotor Skorpion 250R/90
Brand: Teknamotor
SKU: 7CDA1EFC
Availability: InStock

不含税价格

向卖家询价

保存搜索

打印

信息

类别

木材切割机

品牌/型号

Teknamotor Skorpion 250R/90

生产年份

2025

附加选项

未使用

设备所在位置

Ostrowiec Świętokrzyski, świętokrzyskie

国家

波兰

一般等级

马斯客 ID

7CDA1EFC

详细信息

售后服务记录

是

运输状态重量

1150 公斤

制造国

波兰

附属装置

Skorpion 250 R/90 is designed for shredding tree limbs and trunks with a diameter of up to 250 mm. Overall dimensions (LxWxH) 2830 x 2400 x 2680 [A] / 1800 x 2100 x 2600 [B] [mm] Weight 1450 [A] / 1150 [B] [kg] Branch diameter 250 [mm] No of knives 2 or 3 cutting + 2 counter-knife Feeding speed up to 42 [running meters/min] Chipping capacity up to 18 [stère meters/h] Chip width from 9 to 14 [mm] Feeding unit hydraulic feeder Disk diameter 800 [mm] Hopper dimensions (WxH) 420x255 [mm] Min. power of tractor 80 [hp] ()* - dimension after the pipe is raised, during operation Equipment included: - Swivelled by360° ejection tube with deflector. - PTO shaft. - Own hydraulic system. - Electronic system of work control with hour meter. - Feeding table with a chain feeder. Additional accessories on request: - Extension of the ejection tube.

其他信息

Skorpion 250 R/90 is designed for shredding tree limbs and trunks with a diameter of up to 250 mm. Skorpion 250R/90 is a disc model with a pneumatic blow-out system on the disc. Chips are ejected through the rotating chimney which can turn by 360 degrees in relation to the chassis. The cutting system consists of a disc with cutting knives sharpened on either side. This chipper is mounted on a single-axial chassis, adapted to tow it in the forest and field roads. There is also a version with a three-point system of linkage to the tractor (without single-axial chassis). The chipper is designed to work with an over 80 hp farm tractor. The drive is transmitted from PTO shaft of a tractor with the speed of 540 or 1000 revolutions per minute. The essential equipment of the chipper includes a hydraulic propulsion system that drives the feeding rollers and is driven by its own hydraulic pump. Safety of the operator of a chipper is ensured by a cable safety switch attached, which - by pulling the cord in any direction - causes the hydraulic feed system to stop immediately. Unlocking the system takes place by releasing / unlocking the EMERGENCY STOP button to the work position. Skorpion 250 R/90 is equipped with one of the most modern electronic No-stress systems available on the European market; the system automatically prevents overloading of the drive system by temporarily stopping the feeding. Editing the No-stress overload system allows you to easily change the machine settings and adjust them to individual needs. The program "thick wood", "thin wood" allows a quick change of the working mode of the chipper to suit the currently shredded material and more effective work of the wood chipper. This system has a built-in hourly meter. The chipper is also additionally equipped with an electronic system of work control, protecting the machine against excessive duty through temporary stopping the feeding. Overall dimensions (LxWxH) 2830x2400x2680 [A] // 1800x2100x2600 [B] [mm] Weight 1450[A] / 1150[B] [kg] Branch diameter 250 [mm] No of knives 2 or 3 cutting + 2 counter-knife Feeding speed up to 42 [running meters/min] Chipping capacity up to 18 [stère meters/h] Chip width from 9 to 14 [mm] Feeding unit hydraulic feeder Disk diameter 800 [mm] Hopper dimensions (WxH) 420x255 [mm] Min. power of tractor 80 [hp] Equipment included: -PTO shaft -Independent hydraulic system -Adjustment of height of ejecting the chips -Rotary chimney 360° -No-stress system Additional accessories on request: -Extension of the ejection tube显示更多

Teknamotor Sp. z o.o.

ul. Swietokrzyska 2a 27-400 Ostrowiec Świętokrzyski Świętokrzyskie 波兰

加入马斯客的年限

获取电子邮箱通知

显示Teknamotor Sp. z o.o.的所有产品

举报可疑广告