林肯 Dual Maverick Ranger 305 G

A WELDER FOR ALL SEASONS Make the Ranger 305 G your portable welding station - general stick and downhill pipe, Touch Start™ TIG, MIG, and flux-cored wire capability. The 9,500 watt continuous single-phase AC generator powers motors starting, tools and inverter welders for extended range and process capability. Digital weld meters monitor actual welding output 12-gallon fuel capacity allows for extended operation Electric fuel pump helps avoid vapor lock during high-altitude operation Kohler® Gasoline Engine • 23 HP carburetor. • 25 HP EFI (Electronic Fuel Injection) for easier starts in cold weather and lower fuel use! • Both engines have electric fuel pump to avoid vapor lock at high altitude operation. Multi-Process Welding • Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire and MIG (CO2 and mixed gas). • Only compact gasoline welder in North America rated at 29V for 300 amps of stick or CV welding. • CV wire welding with up to 5/64 in. (2.0 mm) diameter electrodes. Digital Weld Meters • Digital weld meters for amps and volts makes it easy to precisely pre-set your procedures and monitor actual welding output. Superior Arc Performance • Lincoln Electric Chopper Technology® – provides easy starts, a smooth arc, low spatter and optimal bead appearance. Peak Single-Phase AC Generator Power for Motor Starting • 10,500 watts peak, 12,000 for EFI. • 9,500 watts continuous for high capacity needs such as a back-up generator, powering a Lincoln Electric Invertec® inverter welder. Also use for lights, a grinder or other power tools. • AC generator voltage is constant at 120V or 240V at any weld dial setting. Skewed Rotor Design • Skewed rotor design provides AC power suitable for operating Lincoln Electric inverter power sources. Lincoln Electric was the first in the welding industry with this feature. Rugged Reliability • Welding and AC Generator Outputs rated at 104ºF (40ºC).