神钢建机 SK 35 SR
打印
信息
类别
小型挖掘机
品牌/型号
神钢建机 SK 35 SR
生产年份
2024
使用小时
450 小时
国家
中国
一般等级
马斯客 ID
3EE269B1
定价
选择币种
价格
不含增值税
详细信息
最新检验记录
2026-07-14
先前车主有几个
0
底盘状态
Solid and durable
毛重
3500 公斤
辅助液压设备的输出量
38 l/min
排放标准
Stage V / Tier IV Final
履带宽度
300 mm
料斗容积
0.11 m3
运输尺寸(长x宽x高)
482017002.51 m
原色
Original
铲斗/楦头长度
1357 mm
发动机
Yanmar 3TNV82A-B
发动机输出功率
17.8 kW (24.2 马力)
发动机制造商
Yanmar
状态/质保
GOOD CONDITION 1 year warranty
制造国
日本
成交条件
FOB, CFR, CIF, EXW
证书
EPA环境保护署, CE认证, ANSI, EAC GOST, TRUA, JIS, TUV, 美国机械工程师协会
配件
槌机/旋转式剪切床液压线路
空调
快速连接器
履带导引装置
橡皮履带
铲斗
电池切断器
附加设备
柴油加热器
喷杆吊架
炉底滑管
可倾斜液压设备
旋转式剪切床液压设备
车厢防护装置->车厢防护装置/落物保护装置
其他信息
Original Japan Yanmar 3TNV82A-B three-cylinder water-cooled diesel engine, rated power 17.8kW, fully EU Stage V emission standard, low vibration, ultra-low fuel consumption and long service life.
Exclusive Kobelco iNDr integrated noise & dust reduction cooling system, greatly reduce operation noise, less dust into engine compartment, extend machine service life, ideal for residential, villa and downtown construction.
Short tail swing design with only 1160mm tail radius, rear counterweight slightly over track width, flexibly rotate beside walls, fences and buildings, perfect for backyard renovation, pipeline and basement narrow-space work.
Standard 38.4L/min proportional auxiliary hydraulic circuit, compatible with hydraulic breaker, auger, small grapple and tilt bucket, realize multi-purpose operation.
Two working modes H-mode (power mode) & ECO fuel-saving mode, auto idle speed function effectively cut idle fuel waste, balance efficiency and running cost.
300mm wide rubber track as standard, protect asphalt road and lawn; steel track optional for rocky construction sites.
Max travel speed up to 4.4km/h, powerful traction force and 30° climbing capacity, stable walking on muddy, sloped and uneven ground.
Spacious air-conditioned ROPS safety cabin, large panoramic viewing window, shock-absorbing suspension seat, clear digital monitor, comfortable long-hour operation.
Centralized ground maintenance layout, all filters and oil ports are easy to reach, save daily inspection time and lower service cost.
Compact transport dimension 4820×1700×2510mm, small light truck can carry whole machine, low sea & land logistics cost.
Shanghai Zhuodale Machinery Equipment Co., Ltd.
上海市金山区承祖路 168 号 201501 金山卫镇 Shanghai 上海 中国
