黎明重工 HGM80 molino del polvo superfino

Contact for Quotation： Whatsapp：008615838066400 Email：stonecrusher126.com All prices on this page are subject to change without prior notice Cantidad de rodillos(pcs): 21 Tamaño máximo de alimentación(mm): menos de 10mm Tamaño de final(micro/malla): 47-5micro/325-2500malla Capacidad(KG/H): 4500-400 Motor de cuador principal: 55kw Motor de asensor: 3kw Motor de soplador: 45kw Motor de trituradora de martillo: 11kw Motor de alimentador vibratorio: 0.06kw Motor de válvula de descarga： 0.75kw

Three-Ring & Medium-Speed MicroPowder Mill has high efficiency and low cost. Its capacity is raised by 40% compared with airflow mill and mix mill on the condition that the materials, the drive and the fineness of the final powder are the same. The life span of tear & wear parts is more than that of straight impact crusher and turbine mill under the circumstance of same materials and fineness of the final powder. Usually, its life span is more than one year. There is no rolling bearing and screw in the grinding cavity, so as to avoid the damage to the machine caused by tear & wear of bearing and seals and the looseness of screws. The fineness of powder can reach ≦5μm with d97 once.