三一重工 SY 65 C

Bucket type: Backhoe  Tonnage (tons): 6  Total machine working weight (kg): 6700  Bucket capacity (m³): 0.12 - 0.32  Origin: Kunshan, Jiangsu Province  Performance  Rotation speed (rpm): 11.5  Travel speed (km/h): 2.4/4.8  Climbing ability (%): 70/35°  Ground pressure (Kpa): 33  Bucket digging force (kN): 56  Boom digging force (kN): 35.6  Power system  Engine model: SANY D03S3  Rated power (kw/rpm): 42/2100  Maximum torque (N.m): 1900/1600 - 2000  Displacement (L): 2.77  Number of cylinders (pieces): 4  Cooling method: Water cooling  Hydraulic system  Main pump type: Variable vane piston pump  Maximum flow rate of main pump (l/min): 149  Travel hydraulic circuit (Mpa): 26  Rotation hydraulic circuit (Mpa): 21.6  Control hydraulic circuit (Mpa): 3.6  Main overflow set pressure (Mpa): 26  Number of boom cylinders × cylinder diameter × stroke (mm): 110 × 885  Number of bucket cylinders × cylinder diameter × stroke (mm): 90 × 900  Number of bucket cylinders × cylinder diameter × stroke (mm): 80 × 730  Whether the hydraulic pipe for crushing is standard: No  Oil capacity  Fuel tank (L): 145  Hydraulic oil tank (L): 120  Engine oil replacement volume (L): 9  Coolant (L): 12  Main body dimensions  Total length for transportation (mm): 6000  Total width for transportation (mm): 2160  Total height for transportation (mm): 2560  Full height of the driver's cabin (mm): 2560  Ground contact length of the tracks (mm): 2180  Total length of the tracks (mm): 2710  Width of the track plate (mm): 400  Total width of the tracks (mm): 2160  Track gauge (mm): 1680  Minimum ground clearance (mm): 375  Rear rotation radius (mm): 1720  Number of idler wheels (single side) (pieces): 1  Number of track plates (single side) (pieces): 42  Number of supporting wheels (single side) (pieces): 5  Working range  Maximum digging radius (mm): 6160  Maximum digging depth (mm): 3985  Maximum digging height (mm): 6930  Maximum unloading height (mm): 5145  Maximum vertical digging depth (mm): 3470  Width × height of the plow plate (mm): 460 (plow plate height)  Lift or push depth of the plow shovel (mm): 200/480