小松 PC 200-10

KOMATSU PC200-10M0 Standard Track Hydraulic Excavator Specifications 1. Basic Machine Parameters Full Model: KOMATSU PC200-10M0 Standard Track Medium Crawler Excavator (CE Export Version) Standard Operating Weight (ROPS air-con cab + 600mm triple-grouser steel track + 5.7m one-piece boom + 2.925m standard arm + 0.94m³ general bucket + 75kg operator): 20000 kg LC long track version operating weight: 20500 kg Standard Heaped Bucket Capacity (ISO): 0.94 m³ Optional bucket range: 0.80 ~ 1.00 m³ Boom Length: 5700 mm Standard Stick Length: 2925 mm Track Shoe Width: 600 mm triple-grouser heavy steel track (700/800 mm optional) Track Gauge: 2200 mm Overall Undercarriage Full Width: 2800 mm Rear Tail Swing Radius: 2835 mm Ground Contact Pressure (600mm track): 45.2 kPa Minimum Ground Clearance: 440 mm Standard Counterweight Mass: 4800 kg 2. Engine & Power Performance Engine Manufacturer: KOMATSU Engine Model: SAA4D107E-1 Inline 4-cylinder turbocharged intercooled common rail diesel Displacement: 4.46 L / 4460 cc; Bore × Stroke: 107 mm × 124 mm Net Rated Power (ISO 9249 @ 2000 rpm): 103 kW (138 HP) Gross Power (SAE J1995): 110 kW (148 HP) @ 2000 rpm Max Torque: 615 N·m @ 1400 rpm Fuel Tank Capacity: 400 L Hydraulic Oil Tank Volume: 138 L; Full system hydraulic oil volume: 198 L Engine Lubricating Oil Volume: 19 L Travel Speed: Low 3.0 km/h / Medium 4.2 km/h / High 5.6 km/h Swing Speed: 12.6 rpm Gradeability: 70% (35°) Max Bucket Breakout Force (ISO): 149 kN Max Arm Crowd Force (ISO): 108 kN Max Drawbar Traction Force: 238 kN 3. Hydraulic System (New Generation HydrauMind Closed-Center Load Sensing System) Main Pump: Dual variable displacement axial piston pumps Total main pump maximum combined flow: 439 L/min Main circuit relief pressure: 37.3 MPa Swing circuit relief pressure: 28.9 MPa Standard bidirectional auxiliary hydraulic max flow: 128 L/min Factory pre-installed proportional auxiliary piping for hydraulic breaker, rock auger, thumb grab Standard Functions: Straight-line travel, ISO / SAE control pattern switch, auto two-speed travel, auto engine idle & auto stop, 6 working modes (Power / Economy / Lifting / Breaker / Fine / ECO) 4. Full Working Range Dimensions (mm, standard 5.7m boom + 2.925m arm) Max Horizontal Digging Reach (Ground Level): 9680 Max Digging Depth: 6515 Max Vertical Wall Digging Depth: 5810 Max Digging Height: 10065 Max Dumping Height: 7160 Minimum Front Swing Radius: 2990 5. Overall Transport Dimensions (mm, standard bucket fitted, boom retracted) Total Transport Length: 9485 Total Transport Width: 2800 Overall Transport Height (cab top): 3040