杰西博 3 CX Plus

Included 2 digging bucket, original JCB hammer, palett fork, openable loader bucket

I have for sell 1 pcs JCB 3CX Plus backhoe loader: BJ 2022, working hours 260 h, like a new Operating weight: - the operating weight of the equipment is 8135 kg, Engine number: 3014854 Engine: - 4800 cm3, 4-cylinder direct injection water-cooled JCB Ecomax Stage V turbodiesel, engine (81 kW/109 HP) - built-in SCR (AdBlue injection) and DPF (particulate filter) for environmentally friendly operation - automatic engine shutdown (after a preset time) for better fuel consumption Cabin: - ROPS/FOPS safety cabin, which provides increased protection for the operator - lever control with optional SAE + or x mode (optional when ordering) - fully adjustable operator seat with lumbar support - ergonomically positioned controls - extremely low 75dB internal noise level - 7” color LCD display - automatic safety belt - 3-stage fresh and interior air circulation, heating - air conditioning - immobilizer built into the ignition key - enlarged exterior and interior mirrors - speedometer - bluetooth radio, built-in speakers - LED yellow flashing lights recessed into the corners of the cabin roof Steering: - fully hydrostatic system, emergency steering works in case of engine failure Electrical equipment: - 12 volt negative earthed wiring and connectors, tested according to IP69 standard - central fuse panel, 120 Ah JCB battery - with work lights, complete lighting suitable for road traffic - horn that can be operated in all work phases Gearbox: - special gear mechanism designed and manufactured by JCB, developed for JCB backhoe loaders - synchronised gear in all gears, which can be switched under load - four forward and reverse gears, with /POWERSHIFT/ reverser, - maximum travel speed: 41.8 km/h Torque Lock: - JCB Torque Lock allows the operator to significantly reduce the time required to travel, improving fuel efficiency during road transport. Tyres: - front: Michelin 340/80-18” - rear: Michelin 480/80-26” Slide Stabilizer (SRS): - connected to the loader lifting cylinder, when active, the system compensates for unevenness in the road or terrain, thus ensuring smoother travel Hydraulic system: - axial piston pump, which always allows optimal oil delivery according to the load - pump capacity: 165 l/min - operating pressure: 251 bar Loading structure: - with open-folding loading bucket (1.2 m3), pallet fork, bucket leveler, with claws equipped - 5/8-inch loading hydraulics - claw guard for road transport - loading height: 3200 mm - unloading height: 2720 mm Backhoe attachment: - with laterally adjustable telescopic backhoe structure, boom clamp (for road transport), - 300 mm backhoe bucket (equipped with claws) - 600 mm backhoe bucket (equipped with claws) - 1500 mm hydraulically tiltable slope bucket - with hammer and slope hydraulics - HM 033T hydraulic demolition hammer - mechanical quick coupler (QH) - maximum digging depth: 5970 mm - maximum boom reach: 6520 mm Automatic system: - automatic idle speed when digging (after 3 seconds, when pausing the use of the digging attachment) - automatic speed reset when returning to the digging attachment - when driving, the machine maintains the arbitrarily set speed (cruise control) JCB LiveLink telematics system with 5 years of availability: - a satellite tracking system that allows JCB owners to remotely monitor their machines and retrieve data related to their operation: location, geofence setup, operating hours, periodic maintenance, fuel level, fuel consumption