Matec MAGNUM FP2000X2000/100 NEWTT HTP

2018 Matec MAGNUM FP2000X2000/100 NEWTT HTP Filter Press MAGNUM FP2000X2000/100 – Fluid Handling Equipment Water Treatment Title: Filter Press MAGNUM FP2000X2000/100 SKU: 114604 Model: MAGNUM FP2000X2000/100 NEWTT HTP Year: 2018 Condition: Used S/N: 18202001 [PDF MAGNUM FILTER PRESS DATA SHEET](... Process - The actual filtration process occurs in the filter pack, consisting of a customized set of plates. - The cloths and under-cloths cover the filtrating surface of the plate, which has small projecting cylinders forming drainage channels. - Once the filter pack is completely sealed, the filtration process begins from the head plate with the feed pump injecting the sludge into the filter plates chambers. - The cake will form uniformly all across the filtrating surface and is ready for discharging once the required moisture level has been reached. Magum Filter Press - 100 plates CH32,5 (plates CH30 (recessed) e CH35 (membrane)) - Closed loop discharge - New TT - Centralina - Shakers - Real Wash - Core blow - Drip tray - Framing of the structure - Pressure: 21 bar - Tension: 575V 60Hz - PLC: Allen Bradley - System Voltage: 575 V, 60 Hz - Length: 14210 mm - Width: 3430 mm - Foot Wheelbase Length: 12070 mm - Foot Wheelbase Width: 1356 mm - Total Height: 3795 mm - Weight: 57380 kg - Chamber Volume: 115 L - Capacity Per Cycle: 11500 L - Cu. m/h (2 cycles): 23.00 - Ton/h (2 cycles): 42.55 - Cu. m/h (3 cycles): 34.50 - Ton/h (3 cycles): 63.83 NOTE: The ton/h and cu. m/h data above are calculated on a material specific weight of 1.85 and a 35 mm cake thickness